small update.
I god damn hate bleed nipples. Encountered a problem today when attempting to remove said nipples. Namely they sheared off. Not only on the caliper that i was using, but also the spare one that i sourced prior to the build in case of exactly this happening. seriously annoyed as prior to this i had spent a good two hours modifying the caliper mount to fit in the swingarm properly without having to stretch it appart. Of course it isn't a standard srx one, of which i have at least one spare (with free nipple) and managed to find another three exactly the same hunting through the yard, its off a FZR 400 which has the banjo on top not on the side.
A solution was at hand though as I managed to get a caliper and mount off a GS 500 to fit. Not as pretty, but a lot more plentiful, so hopefully the rear caliper setup is nowsorted. On a plus note,the front calipers shed their nipples with no fuss at all, so they'll hopefully be blasted and painted tomatch the silver of the forks in the next couple of weeks or so.
Hopefully i'll have some pictures of the headlight fitted tomorrow as i have polished up the headlight mounts and modified the srx bracket to suit the forks i am using.
nb. mentioning nipples four times in a post must be some sort of record
