Author Topic: SRX-6 Twin Shock  (Read 704 times)


themoudie

  • Full Member
  • ***
  • Posts: 4808
Re: SRX-6 Twin Shock
« Reply #1 on: September 11, 2018, 12:22:08 AM »
MMMmmmmm!  :-\

After market rear shocks, paint missing from the front brake resevoir and throttle switch block, seat cover seam split/torn at the front on the right-hand side, after market mirror, rear brake line wearing a hole in itself on the rear brake torque arm, re-painted rear brake resevoir. Very nice and clean. But, " in mint condition not a mark on it", may be not, or am I being a pedant?

Aye, aye, there'll be some flack, no doubt!  ;)

My regards, Bill

Moto63

  • Full Member
  • ***
  • Posts: 4176
Re: SRX-6 Twin Shock
« Reply #2 on: September 11, 2018, 07:05:21 AM »
Oh baa humbug, flak, flak, flak.....🤣🤣🤣🤣🤣🤣🤣
Name withheld to protect the innocent 😁🤘

Mutt

  • Jr. Member
  • **
  • Posts: 63
  • XBR500
Re: SRX-6 Twin Shock
« Reply #3 on: September 11, 2018, 11:29:00 AM »
It does look very nice but isn't that an incorrect size bolt in the fork leg too?
Also, "not a mark on it" may be right as the sellers name may be Gordon! Loff, I nearly squailed :)
Regards, Clive.
Remember to never lose sight of reality: If it looks like a duck, it walks like a duck and it quacks like a duck... that duck is NOT an elephant!

themoudie

  • Full Member
  • ***
  • Posts: 4808
Re: SRX-6 Twin Shock
« Reply #4 on: September 11, 2018, 12:14:20 PM »
 ;D Thank you for the flak (used an Americanism last time! :-[ ) and the squail, maybe threw a boomerang myself.  ;)

My regards, Bill


Ian

  • Full Member
  • ***
  • Posts: 2008
Re: SRX-6 Twin Shock
« Reply #5 on: September 11, 2018, 12:45:53 PM »
Just seeing how many are still awake 😴🙄😏
1 New SRX 1 C400X 1 GB350S

themoudie

  • Full Member
  • ***
  • Posts: 4808
Re: SRX-6 Twin Shock
« Reply #6 on: September 11, 2018, 10:36:43 PM »
CooWee!

Just off to sheet alley Ian, trust all OK. The rebuild continues, yes I know I've been faffing! ::)

My regards, Bill

Steve H

  • Full Member
  • ***
  • Posts: 1855
Re: SRX-6 Twin Shock
« Reply #7 on: September 12, 2018, 08:27:08 AM »
Fork legs and stanchions are not original, non standard bolts holding front disc on.

Steve Lake

  • Full Member
  • ***
  • Posts: 2396
  • Dyslexics have more nuf
Re: SRX-6 Twin Shock
« Reply #8 on: September 14, 2018, 08:39:15 AM »
having noted all the above comments/misgivings ...  the asking price is a bit over the top methinks .... !! fifteen hundred nearer the mark ??

Ian

  • Full Member
  • ***
  • Posts: 2008
Re: SRX-6 Twin Shock
« Reply #9 on: September 14, 2018, 04:27:37 PM »
Yes Steve you are probably right but I dont think they would go that low!
1 New SRX 1 C400X 1 GB350S

Steve Lake

  • Full Member
  • ***
  • Posts: 2396
  • Dyslexics have more nuf
Re: SRX-6 Twin Shock
« Reply #10 on: September 21, 2018, 07:50:01 AM »