Aye john,
Have a read of my mates blog:
Gino_on_Tour Then click on "The bikes and Gear for The big trip" tab.
Buenos Aires to Anchorage to Florida, October 2012 onwards on the blog, make your own mind up!

I had a Funduro 1994, looked good but the finish behind the SS fasteners and plastic was c**p and the powder coating was aptly named as it fell off in great lumps from all the alloy, with no sign of an initial primer to aid adhesion, leaving great grey pustules, erupting from the alloy. Footrests were 2" to far forward and bars too low for standing riding on the pegs; I'm 6'2" and long in the back and arm. I made new mounts for the pegs and added risers to the bar mounts.
Sold the bike rather than try to spark erode the mild steel studs out of the cylinder head holding the exhaust in and the seal went on the water pump 2 weeks after selling, so mixing coolant with lubrication!

Check this site as well for a whole load of info, tricks, wheezes, whinging and devotion:
Chain_Gang!All the best, Bill