2 in 1 exhaust system on XBR

[500 T C]

Can anyone tell me, or had experience of fitting a 2in to1 exhaust system from Sandybike spares.
My question is, can you still use the main stand? Its not very apparent in their promotion photos.     

[Moto63]

Good evening TC. I,ve not personally fitted one of these systems but looking at their promo pics I wud say yes you can use the centre stand. The silencer (both styles ) have a centre stand lug welded on complete with rubber stopper, also the pics of the red XBR they use as promo pics still has a centre stand attached. So one wud have to say yes (I think so). Try ringing or e mailing them to ask, I,m sure they,d be glad to help. Regards Michael.
Ps let us know the outcome if you do get one

[500 T C]

watch this space just ordered one, l will let you know how it works out

[500 T C]

                    Exhaust system nicely made and robust.The down pipes are fixed ,and fit well into the exhaust holes.
Clamps are included,takes a little  trial fitting the" silencer"to the adjustable mounting bracket.
All round a well made product,looks the business and simple, and the main stand comes up against a rubber stop.
Only down side, the "silencer" is very loud. Now searching for a baffle to make it neighbour hood friendly!

[Oldtimer]

Just fitted the same on mine. Had a Motad 2into1 fitted previously. Fitting was straight forward but found the end of pipe too long to fit my own silencer [Gold Star pattern] so had to cut the pipe shorter to be able to get a fixing to the foot rests bracket. I did find the upswept of the pipe a little steeper than the old one as now the silencer is very close to the footrest pegs. Didn't need to fix the bracket supplied as I have the original center stand stop on the other side of the bike to stop the chain rubbing on the stand.
All in all I am quite pleased with the product and would recommend them.
Happy [noisy] Days !!!!!