Xbr500 conrod

[hyperbimduke]

Where can I source a new condos & piston pin for a 86 xbr

[Rossco500]

Some XBR stuff is getting harder to source these days. I think the gudgeon pin is no longer available from Honda. I wonder could an engineering company replicate a pin for you. Predator UK do a conrod kit but without the pin and if you have look on ebay under "Honda XBR 500 - Rod Kit Prox - 401602" they have a couple for sale in France.

Also the company below offer a complete piston kit. Either way its going to end up quite expensive and sourcing another engine may be the option - but unless you can hear it running that's always a risk.

https://www.greenlandmx.co.uk/en/prox-piston-honda-gb-500-87-97-xbr-500-85-89-nx-500-9.5%3A1-/01.1589.050-P.html

Regards

Tony

[hyperbimduke]

Any recommendations for someone pressing apart crank for the conrod, & also gonna rebore & replace piston due to wear from the piston rocking side to side due to worn small end.

[themoudie]

Aye hyperbimduke,

Location?

Good health, Bill

[hyperbimduke]

Hey Bill, Milton Keynes area

[JOOLZ]

hyperbimduke Eastwood racing  London Rd, Swanley BR8 8BY they bave built 2 of my cranks

[Moto63]

Hi Chris. I can highly recommend Rod Spry engineering. Wealth of experience building Honda XL, XR, XBR engines. Will have literally built hundreds of them.
Www.rodspry.co.uk
07738112589
Rod Spry engineering. Water street, Rossendale, Lancashire BB4 8AP
Best of luck with it 👍

[tevie54]

Do you know the diameter and the length of the gudgeon pin