« previous next »
Pages: [1]

Author Topic: Hydrolic clutch conversion  (Read 383 times)

JOOLZ

  • Full Member
  • ***
  • Posts: 937
Hydrolic clutch conversion
« on: September 03, 2018, 10:31:12 AM »
No more snapped clutch cables and a lighter feel, this could be the way to go   https://m.banggood.com/M10x1_25mm-Motorcycle-Hydraulic-Clutch-Master-Cylinder-Brake-Pump-p-1061475.html?rmmds=search
Logged

Moto63

  • Full Member
  • ***
  • Posts: 4176
Re: Hydrolic clutch conversion
« Reply #1 on: September 03, 2018, 11:07:36 AM »
All I can say Joolz is "don't do it" our mate bought the exact same piece of kit (that shud read something else🤣🤣) it truly was a complete load of junk....
Logged

Propellor

  • Full Member
  • ***
  • Posts: 1259
Re: Hydrolic clutch conversion
« Reply #2 on: September 03, 2018, 11:35:30 AM »
DON'T DO IT!!!

See above.

Go venhill.
Logged
BEIGE is all the rage

Guzziless Steve

  • Full Member
  • ***
  • Posts: 184
Re: Hydraulic clutch conversion
« Reply #3 on: September 03, 2018, 12:15:42 PM »
Of all the bikes I have owned the ones with hydraulic clutches without fail have heavier clutches than those with a cable operated clutch.  Also easy to replace a cable at the side of the road but not a blown seal in a master or slave cylinder!
Logged
Pages: [1]
« previous next »