Thumper Club Forum

Club House => Chatter => Topic started by: spooky on September 26, 2019, 04:01:08 PM

Title: tiny tach
Post by: spooky on September 26, 2019, 04:01:08 PM

bought a small digital tachometer from ebay, very simple , one wire that wraps around ht lead , tried it on gn250 first to check accuracy and it`s near enough, then tried it on gilera and that seemed about right, so i cable tied it temporarily to the RE to see what sort of rpm that does, i will report back,  might try it on the 2cv as well !

Title: Re: tiny tach
Post by: Propellor on September 26, 2019, 04:21:52 PM

The Enfield doesn't work on rpm. It comes from a time before rpm was invented 🤣🤣🤣🤣

Title: Re: tiny tach
Post by: spooky on September 26, 2019, 04:23:00 PM

bother..  back to counting lamp posts then.. :)

Title: Re: tiny tach
Post by: Moto63 on September 26, 2019, 04:46:25 PM

That's the spirit 😉😉👍

Title: Re: tiny tach
Post by: CrazyFrog on September 26, 2019, 05:16:07 PM

Surely an RPH (revs per hour) meter would be more applicable to the Enfield?  ;D

Title: Re: tiny tach
Post by: spooky on September 26, 2019, 06:55:44 PM

maybe cph then ?

Title: Re: tiny tach
Post by: themoudie on September 26, 2019, 11:40:25 PM

Or chuffs per hour!  ;D  Bit like those old 'Hit & Miss' engines!  ;)

Regards, Bill

Title: Re: tiny tach
Post by: spooky on September 27, 2019, 06:43:57 AM

i was thinking of  chappatis per hour..