Thumper Club Forum

Club House => Chatter => Topic started by: JOOLZ on September 03, 2018, 10:31:12 AM

Title: Hydrolic clutch conversion
Post by: JOOLZ on September 03, 2018, 10:31:12 AM

No more snapped clutch cables and a lighter feel, this could be the way to go   https://m.banggood.com/M10x1_25mm-Motorcycle-Hydraulic-Clutch-Master-Cylinder-Brake-Pump-p-1061475.html?rmmds=search

Title: Re: Hydrolic clutch conversion
Post by: Moto63 on September 03, 2018, 11:07:36 AM

All I can say Joolz is "don't do it" our mate bought the exact same piece of kit (that shud read something else🤣🤣) it truly was a complete load of junk....

Title: Re: Hydrolic clutch conversion
Post by: Propellor on September 03, 2018, 11:35:30 AM

DON'T DO IT!!!

See above.

Go venhill.

Title: Re: Hydraulic clutch conversion
Post by: Guzziless Steve on September 03, 2018, 12:15:42 PM

Of all the bikes I have owned the ones with hydraulic clutches without fail have heavier clutches than those with a cable operated clutch.  Also easy to replace a cable at the side of the road but not a blown seal in a master or slave cylinder!