Thumper Club Forum

Club House => Chatter => Topic started by: Andy M on July 25, 2016, 01:10:59 PM

Title: You lot would have....
Post by: Andy M on July 25, 2016, 01:10:59 PM

Wanted to install this on an XBR crank case

(http://lh3.googleusercontent.com/-kwEpkRUALMA/V5JCBvYd0nI/AAAAAAAAD4U/a2DD1Lt1wuQq9HirMXOGGY6cH2jqKEpnwCCo/s400/P1030046.JPG)

Fit this into an MZ frame

(http://lh3.googleusercontent.com/-XfyfbG8hWZY/V5JE_Js95kI/AAAAAAAAD6c/wihF3H2E5VUKGdigC92UmT3-2WqsHpFOQCCo/s400/P1030073.JPG)

Take this to the Dragon Rally

(https://lh3.googleusercontent.com/-KhvyzXuqjPk/V5JIRozQqDI/AAAAAAAAD8s/mwRuykZvaL0Deglvcby-N0W3WMMPZ9KkACCo/s400/P1030102.JPG)

wearing

(https://lh3.googleusercontent.com/-L5JEhcB55Ag/V5JAdSFYElI/AAAAAAAAD3E/PdyhOJNosc4vAA4RKChv3m8uEGC0lBS3QCCo/s400/P1030033.JPG)

This however is a British engine

(https://lh3.googleusercontent.com/-S07FJUvFaCc/V5JB0zGMwcI/AAAAAAAAD4E/R_3EwFkJ7t4DOfmFfW8_N7tdGyLgjd2RACCo/s400/P1030045.JPG)

 ;D

Good ride out though.  :)

Andy

Title: Re: You lot would have....
Post by: Andy M on July 25, 2016, 01:16:27 PM

The Burgervan and Not-Cool 750 in the carpark

(https://lh3.googleusercontent.com/-1iPlgjZ2zB0/V5I_gQn4p1I/AAAAAAAAD3E/v3EllLrc29IIXXMhpfX1nV0DU6ac0ua5QCCo/s400/P1030024.JPG)

With exotic company

(https://lh3.googleusercontent.com/-p-CAzVDtOJI/V5I_yaMvvGI/AAAAAAAAD2k/gTfF4NglnE00KsmSS_bun48a6QmJ1VvwACCo/s400/P1030025.JPG)

Andy

Title: Re: You lot would have....
Post by: timbo on July 25, 2016, 02:26:23 PM

There's a few on this forum, who probably could install that on an XBR crankcase  :-\