Thumper Club Forum

Technical => Bike Problems/Questions => Topic started by: guest668 on June 11, 2013, 08:07:40 PM

Title: srx600 front brake callipers
Post by: guest668 on June 11, 2013, 08:07:40 PM

hi does any one know if the same brake callipers that are used on the srx 600 are fitted to any other yamaha's ...fzr for example?
many thanks

Title: Re: srx600 front brake callipers
Post by: themoudie on June 11, 2013, 11:09:39 PM

Aye beezer764,

First port of call should be here: SRX600_Common_parts (http://www.srx600.net/commonparts/commonparts.php&heading=Common%20Parts)

This is SteveH's site and well wortha full perusal.

My regards, Bill.

Title: Re: srx600 front brake callipers
Post by: Steve H on June 12, 2013, 07:42:32 AM

Quote from: beezer764 on June 11, 2013, 08:07:40 PM

hi does any one know if the same brake callipers that are used on the srx 600 are fitted to any other yamaha's ...fzr for example?
many thanks

I have a number of spare calipers if you need one. There are a number of late 80's Yamaha's with the same calipers, piston diameters do vary so worth checking before you buy

Title: Re: srx600 front brake callipers
Post by: guest668 on June 12, 2013, 05:59:17 PM

thanks for the replies...thanks for the offer steve i was looking for a front left hand side calliper.......the one i have has a broken and stuck bleed nipple which i havent been able to remove as yet and am wary of drilling it out incase of  doing more damage....so a spare would be handy

Title: Re: srx600 front brake callipers
Post by: Steve H on June 12, 2013, 06:51:38 PM

Ok I should have one I will check later

Title: Re: srx600 front brake callipers
Post by: Steve H on June 12, 2013, 09:01:49 PM

I have sent you an IM with a link to some photographs of the caliper