Thumper Club Forum

Club House => Chatter => Topic started by: sexually oriented on February 06, 2011, 11:18:43 AM

Title: Help!
Post by: sexually oriented on February 06, 2011, 11:18:43 AM
Anyone know who uses a Fournales shock and has a pump they wouldn't mind lending me???
Title: Re: Help!
Post by: Mark on February 06, 2011, 12:40:28 PM
Quote from: sexually oriented on February 06, 2011, 11:18:43 AM
Anyone know who uses a Fournales shock and has a pump they wouldn't mind lending me???

Just reverse the polarity on your penis enlarger. ;D
Title: Re: Help!
Post by: squirrelciv on February 06, 2011, 12:44:35 PM
Not sure I know what your on about, but I've got a pump for adjusting air assisted front forks. Connects via a car valve fixing and has a very accurate pressure gauge.
Title: Re: Help!
Post by: Furry John on February 06, 2011, 02:16:40 PM
Quote from: sexually oriented on February 06, 2011, 11:18:43 AM
Anyone know who uses a Fournales shock and has a pump they wouldn't mind lending me???

HI jules,

Has Jethro sold his, if so he will know who to?

Furry
Title: Re: Help!
Post by: johnr on February 06, 2011, 03:00:28 PM
i think fournales shocks run at extremely high pressure due to them using the air to act as a spring, so im fairly sure that they need the correct pump to adjust them cos normal airlines dont go gigh enough and front fork air adjustment pumps are designed to add just a very few psi to your suspension, not the 300 or 400psi or so required in the fournales
Title: Re: Help!
Post by: guest40 on February 06, 2011, 03:02:20 PM
The pump needs to be able to deliver at least 300psi, albeit at very low volume.
check out the forenales site.
Spot on Johnr
Title: Re: Help!
Post by: squirrelciv on February 06, 2011, 03:59:02 PM
I'll shut up then :-[
Title: Re: Help!
Post by: Andy M on February 06, 2011, 04:18:39 PM
According to this: http://www.horizonsunlimited.com/hubb/equipping-bike-whats-best-gear/fournales-suspension-43908

Mountain bikes use something similar?

Andy
Title: Re: Help!
Post by: 002 on February 07, 2011, 12:05:13 AM
Jules has the correct pump.
But is having some trouble at the mo,and wishes to try another to see if that makes a difference.
I expect that his shock would need around 40bar.

I know my 900Divi needed 38bar and my Beemer was around 26-30bar.

A compressor wouldnt look at it !

Jethro