Thumper Club Forum
Club House => Chatter => Topic started by: ericthecat on April 11, 2009, 08:06:35 PM
-
Good evening chaps,
I have some clamp on bar risers listed on ebay that some of you may be interested in. I made them myself for the SRX with the intention of replacing the clipons with higher bars, but have decided to stick with the stock set up. They are milled from solid aluminium and bored to suit 36mm fork legs, and the bar centreline will be about 55mm from face of top yoke. Finish is as machined but I can polish them if required. Item No.110375102272
Cheers ericthecat