Thumper Club Forum

Technical => Bike Problems/Questions => Topic started by: Steffan on March 05, 2008, 05:38:34 PM

Title: Clutch cable for a Skorpion with new bars?
Post by: Steffan on March 05, 2008, 05:38:34 PM

I recently aquired a set of Gilles GP lite clipsons for the Skorpion. These eliminate the risers of the Paoli but unforunately the tube end on the clutch cable means that there isn't enough flex not to foul the clocks, so my choice is put everything back and get rid of the Gilles or get some custom cables made. Anyone had this done? Was it expensive and who did it?

Many thanks

Steffan

Title: Re: Clutch cable for a Skorpion with new bars?
Post by: 002 on March 05, 2008, 10:18:16 PM

Try Venhill for cables.
Dont know how much.



You and/or Richard coming to Llanthony at Easter ?

Jethro

Title: Re: Clutch cable for a Skorpion with new bars?
Post by: Steffan on March 06, 2008, 08:01:14 AM

Thanks I will.
I am away camping in N/W Wales with the family so I will not be able to make Easter.

All the best

Steffan

Title: Re: Clutch cable for a Skorpion with new bars?
Post by: guest146 on March 06, 2008, 12:56:29 PM

I have used this chap for special cables. He is realy clued up and very efficent.


JJ Cables     01926651470

Ken