Thumper Club Forum

Club House => Chatter => Topic started by: scottie on December 22, 2007, 08:35:52 PM

Title: plug spanner
Post by: scottie on December 22, 2007, 08:35:52 PM

hi guys
i am havin trouble getting the spark plug out of a gb400tt,i know the engine is the same as the xbr,so is there an easy way to get at the plug?what size plug spanner should it be?

thanks
scottie

Title: Re: plug spanner
Post by: guest18 on December 23, 2007, 12:01:14 AM

Not sure off the top of my head  ??? if none of the XBR/GB experts gets back to you before then I'll try to have a look tomorrow.
Good luck anyway, it's a standard size iirc so shouldn't be *too* bad!

Title: Re: plug spanner
Post by: 002 on December 23, 2007, 03:42:08 PM

Its a 12mm plug.
12mm in this case refers to the thread size.
Infact you will find it has an 18mm Hex.

I have found a proper socket doesnt fit as there is not enough room,a Box spanner is required.


Jethro

Title: Re: plug spanner
Post by: scottie on December 23, 2007, 07:31:06 PM

thats great,i will go and hunt one down tomorrow,thanks very much!! happy christmas to you all