Thumper Club Forum

Technical => Bike Problems/Questions => Topic started by: weedug on November 17, 2007, 07:04:26 PM

Title: srx 600
Post by: weedug on November 17, 2007, 07:04:26 PM

i,m looking to put a new piston on my bike to make it a 640 .where do you get new pistons to bore bike out

Title: Re: srx 600
Post by: Steve H on November 18, 2007, 05:52:23 PM

These guys are probably a good starting point.
www.wiseco.co.uk

Title: Re: srx 600
Post by: andy230 on November 21, 2007, 11:39:20 AM

Quote from: weedug on November 17, 2007, 07:04:26 PM

i,m looking to put a new piston on my bike to make it a 640 .where do you get new pistons to bore bike out

I have a good but used 690 piston if you really want to push the limit!!  For an XTZ really, you'd probably need a new liner, and possibly open out the crankcase mouth.  Not for the faint-hearted.

Bit of info (not much) here:

www.team-thumper.wetpaint.com

and have a look at the blog site.  Thats the motor the 690 came off of.

a