Thumper Club Forum

Club House => Chatter => Topic started by: ram427 on October 22, 2007, 12:30:04 PM

Title: Exhaust collector for SRX special
Post by: ram427 on October 22, 2007, 12:30:04 PM

Hi

I'm about to fit a carbon exhaust can to my SRX600 and need to get a 2-1 collector made. Is there anywhere selling 'standard' items or has anyone used a manufacturer they can recommend.
I don't know the dimensions yet, just feeling out likely sources. I know you can get stainless dairy bends but the collector is going to be a different thing.

The can is a Carbon Can Company product for a honda 600 CBR and I dont think they ever made a unit for the SRX.

I guess this will go into Recommended Service section.

Thanks

Roger

Title: Re: Exhaust collector for SRX special
Post by: andy230 on October 22, 2007, 01:43:01 PM

Hi Roger,

I think Supertrapp did one, as part of their 2-1 system.  Maybe you can find one if you're lucky?  (very lucky, I think!)

Thats whats on the racer, pics on the site, but there are no pics of this bit specifically.

Look here:

http://team-thumper.blogspot.com/

And scroll down to the pic of it as a roadbike.  You can see it the supertrapp 2-1 but its not very clear.

Hope it helps? 

andy

Title: Re: Exhaust collector for SRX special
Post by: Steve H on October 22, 2007, 02:29:51 PM

2-1 from an SRX monoshock will fit the twinshock head. Finding one may not be so easy

Title: Re: Exhaust collector for SRX special
Post by: guest27 on October 22, 2007, 06:56:52 PM

Would someone like Phoenix in Wales be able to make something - they do complete exhausts and the like.

R