« previous next »
Pages: [1]

Author Topic: gn rear wheel change  (Read 534 times)

spooky

  • Full Member
  • ***
  • Posts: 1069
  • Sunny Dumfries
gn rear wheel change
« on: October 22, 2016, 08:00:46 PM »
does anyone know which other suzuki model rear wheel fits a gn ? ideally an 18"  ?
Logged
Gn250,CG125, Terrot 125,st70

johnr

  • Regular
  • Full Member
  • *
  • Posts: 1375
Re: gn rear wheel change
« Reply #1 on: October 22, 2016, 08:27:50 PM »
depends what you are trying to achieve. i imagine any small suzuki wheel will be able to be made to fit without too much effort.
Logged

SteveC#222

  • Posts: 1900
Re: gn rear wheel change
« Reply #2 on: October 23, 2016, 08:40:05 AM »
TS125/185/250? they would probably fit though you might have to play around to get the suspension/ drive line clearences right.  Maybe even a GS125 would do - the GN isn't very big for a 250 in fact I think the GN125 rolling chassis is virtually the same. The 16"x 5" rear tyres for the GN are hard to find and expensive - I used a 3.50  on mine and changed the gearing to compensate which was easier/cheaper . My GN always seemed to eat whatever tyres I put on it - not through excessive speed or power!! - I often wondered if the 16" wheel was the culprit.
Logged
Growing old is inevitable, growing up is optional!

spooky

  • Full Member
  • ***
  • Posts: 1069
  • Sunny Dumfries
Re: gn rear wheel change
« Reply #3 on: October 23, 2016, 09:38:06 AM »
this is the type of wheel i am looking for, possibly gs 125 ? 550 ?  as above,  16" tyres are harder to get whereas an 18" gives more variety



this bike was for sale up a gumtree about a year ago, think it had gs125 tank/panels...
Logged
Gn250,CG125, Terrot 125,st70

johnr

  • Regular
  • Full Member
  • *
  • Posts: 1375
Re: gn rear wheel change
« Reply #4 on: October 23, 2016, 09:52:45 AM »
right, snowflake spoke pattern but with a drum brake as opposed to a disk. gs125 runs iirc an 18 inch rear snowflake with a drum, prettty cheap to come by. also, iirc the older gsx250/400 twins had a similar setup. i once had a gn400 single that had the back wheel collapse, broken spokes, cos i was pulling a sidecar with it and it couldnt hack the side loadings, so i fitted a gsx400 rear wheel, as i recall it was just a matter of changine a wheel bearing to make it fit on the gn spindle. if it were a disk rear that you wanted, ive literally got a pile of snowflake pattern gs and gsx rears in 18 and 17 inch sizes, drum rears are a bit trickier to source, but i think that gs125 will be ok. that bike pictured also has a gs125 tank and sidepanels fitted so its a fair assumption that its owner bought a complete bike to build it up, and used the wheels too.
Logged

manxie

  • Posts: 1172
Re: gn rear wheel change
« Reply #5 on: October 23, 2016, 08:25:58 PM »
I think the Suzuki X5 and X7 had these wheels too, not sure of size though?  :-\

Just found this ... pretty sure they`re 18" ... ?


http://www.ebay.co.uk/itm/Suzuki-X7-GT250-Rear-wheel-rim-1978-1983-/142059123253?hash=item2113623235:g:T1QAAOSwqfNXjiUA





[attachment deleted by admin]
« Last Edit: October 23, 2016, 08:45:02 PM by manxie »
Logged
1980 Yamaha XT250
1985 Honda ATC200
1998 1200 Bandit
1978 Bultaco Sherpa project (not started)
1968 Kawasaki F3 175 Bushwhacker (project in progress)
Pages: [1]
« previous next »