Technical > Bike Problems/Questions
XBR Footrests
(1/1)
Harfleeter:
Hi all.
Does anyone know of a readily available replacement for the standard front (riders) footrests for the XBR 500?
The previous owner of my bike replaced the standard pegs with a pair of dubious quality 'lower/adjustable ' items. Crapola!
I wondered whether any of you had ever replaced your rider's pegs with an alternative or aftermarket version that fits or would fit with a little persuasion?
Grateful for any advice.
Itsme:
Hi Harfleeter (Took me a while but I get it!)
Is it just the pegs you wish to replace or the hangers as well? I have a pair of footpegs off a Honda CBF500, just the actual pegs, that you are welcome to if you think they might be any good.,
I am actually about to go off on my hols until Friday and won't be able to see a reply until I get back, but if you want to have a look to see if you can modify them feel free to PM me an address and I will post them off to you next weekend.
Ian
richardeblack:
Yes, I'm not quite sure what you've got. If you send a photo I might have something that might help you out.
Richard
mthee:
--- Quote from: Harfleeter on July 29, 2022, 03:03:24 PM ---Hi all.
I wondered whether any of you had ever replaced your rider's pegs with an alternative or aftermarket version that fits or would fit with a little persuasion?
Grateful for any advice.
--- End quote ---
I replaced my front set with my pillion set for a smaller look on a project bike. The pillion pivot pin hole needed taking out a bit and I used a bolt and nut. Pic if you'd like?
iansoady:
I've done the same on my CB250RS which effectively lowers the top surface by 1/2" or so - not much but I can feel the difference.
Navigation
[0] Message Index
Go to full version