« previous next »
Pages: [1]

Author Topic: Bottom yoke  (Read 645 times)

JOOLZ

  • Full Member
  • ***
  • Posts: 936
Bottom yoke
« on: September 16, 2013, 04:11:32 PM »
Im not holding up much hope that anyone might know, but here goes......Does anyone know of an alloy bottom yoke that will fit the XBR.
Logged

guest295

  • Guest
Re: Bottom yoke
« Reply #1 on: September 18, 2013, 09:05:51 AM »
Apparently the 600RR front end fits right on.
Logged

JOOLZ

  • Full Member
  • ***
  • Posts: 936
Re: Bottom yoke
« Reply #2 on: September 18, 2013, 10:56:42 AM »
Hi thanks I thought about going down that route, but the forks would be too long and would need quite a lot of work to sort out and I want to keep the standard top yoke as the 600 forks are a larger diameter
Logged

Propellor

  • Posts: 1187
Re: Bottom yoke
« Reply #3 on: September 18, 2013, 11:10:43 AM »
Quote from: GB500nz on September 18, 2013, 09:05:51 AM
Apparently the 600RR front end fits right on.

The head bearings are the same inner and outer diameter?
Logged
BEIGE is all the rage

SteveC#222

  • Posts: 1900
Re: Bottom yoke
« Reply #4 on: September 18, 2013, 04:37:29 PM »
Hmmmm......don't take this as Gospel without confirming it, but I seem to remember the CX500/650 front end fitted on with little adaptation and gave you twin discs up front - if you get the Eurosport version you also get the Boomarang Comstar front wheel. As I said just double check  this before you buy anything.
Logged
Growing old is inevitable, growing up is optional!

JOOLZ

  • Full Member
  • ***
  • Posts: 936
Re: Bottom yoke
« Reply #5 on: September 18, 2013, 05:51:15 PM »
No that wouldnt work, I want to keep my original wheel
Logged
Pages: [1]
« previous next »