Rotax lump and Mikuni carb

[guest27]

Looooooong time back I was told by anumber of you not to bother with an AMal carb for the Rotax lump but to find a Mikuni carb.  Well allowing for the vageries of the PO there will be a nice big one arriving from fleabay soon.  Now having told me  I need an Mikuni on it - does anyone have any starting points for jetting it?  With the Amal I was going to jet the 40 the same as the 32 and go from there - main would need to be biger but the pilot etc may have been right.  So anyone of you have any jetting specs for a Mik on a Rotax?

Ta

R

[002]

Try Allens Performance...the Mikuni Specialist.

Jethro

[guest27]

Ta Jethro - I always feel bad about asking advise as I may end up buying nothing - mind I habd out advise to prostective customers like sweeties outside a sixthform college...

Carb has arrived - bugger it is big, and rather lovely - Glad I did not get the hole in the bottom of the tank welded I will have to make it bigger.



R

[guest207]

Rog if its a VM44...you really DONT want it honestly!........BUT it would be fine on my bike

[guest27]

LOLOLOL Mik - It is apparently an OE carb from something.  It would bore out to 44 and is probably far bigger than my nike needs - what is it on yours a 40?  38 mm dellorto?

Oh if you still have them I am still interested in those wheels - just not seeming to get far from home with out a really tight leash at the mo.

R

[guest207]

yeh supppose i will just have to stick to my poxy 40mm dellorto then 

Still got the wheels, not bothered advertising them so still yours.

[guest27]

Ahhhh sad

If you want to have a nose at the mikki I can always take a load of pics and send them to you.

R