« previous next »
Pages: [1]

Author Topic: clip ons on srx  (Read 717 times)

guest668

  • Guest
clip ons on srx
« on: July 29, 2011, 09:38:18 AM »
any one know if i could get a set of 35mm clip ons to fit the srx...just been offered some really cheap.
Logged

Steve H

  • Full Member
  • ***
  • Posts: 1850
Re: clip ons on srx
« Reply #1 on: July 29, 2011, 10:17:36 AM »
Forks are 36mm on twinshock SRX and 38mm on the monoshock SRX
Logged

guest668

  • Guest
Re: clip ons on srx
« Reply #2 on: July 29, 2011, 04:15:46 PM »
so they wont fit then...
Logged

Ian

  • Full Member
  • ***
  • Posts: 1980
Re: clip ons on srx
« Reply #3 on: August 02, 2011, 07:23:19 PM »
Quote from: beezer764 on July 29, 2011, 04:15:46 PM
so they wont fit then...


Perhaps I may be able to bore them out ?

Ian
Logged
1 New SRX 1 C400X 1 GB350S

guest1350

  • Guest
Re: clip ons on srx
« Reply #4 on: August 02, 2011, 09:08:02 PM »

The bars I have on my bike while they clip on to the forks above the top yoke they do clamp the forks.  What style do you have on there now? I would not mind doing a swap if it meant mine were a little higher.

Logged

Steve Lake

  • Full Member
  • ***
  • Posts: 2393
  • Dyslexics have more nuf
Re: clip ons on srx
« Reply #5 on: August 07, 2011, 09:01:50 PM »
if you want to use your original clipons, but dropped between the top and bottom yokes, then you can grind off the locating lugs, and polish them up. they'll fit fine.... done it on several bikes
Logged

guest668

  • Guest
Re: clip ons on srx
« Reply #6 on: August 10, 2011, 07:58:52 PM »
thanks steve i have a spare pair of original clip ons so will give that a go...
Logged
Pages: [1]
« previous next »