Thumper Club Forum

Technical => Bike Problems/Questions => Topic started by: tommy on April 23, 2013, 10:27:02 PM

Title: xbrgearshaft seal
Post by: tommy on April 23, 2013, 10:27:02 PM

hi i need to replace the gear shaft seal on my xbr it looks like i can do this without removing the shaft and just slipping a new seal on without to much hassle anyone done this thanks tommy

Title: Re: xbrgearshaft seal
Post by: JOOLZ on April 25, 2013, 11:32:58 AM

You should be able to install the seal ok, word of warning though, there is no backstop to position the seal so only tap it in so the face is level with the case.

Title: Re: xbrgearshaft seal
Post by: tommy on April 25, 2013, 09:51:04 PM

many thanks joolz
tommy