Thumper Club Forum

Technical => Bike Problems/Questions => Topic started by: spooky on February 23, 2019, 02:37:56 PM

Title: chain question
Post by: spooky on February 23, 2019, 02:37:56 PM

Ok, bike had a 101 link chain, which was fully adjusted and as far forward as possible, correct chain is 102 links and is fine, fitted and whizzing around fine, my question is.... if i fitted a half link to the 101 chain using two connecting links,  how many links would it be ???i have puzzled over it and i think it will be 103 ? (i don`t have a half link yet)

Title: Re: chain question
Post by: Propellor on February 23, 2019, 05:07:18 PM

This might be interesting? Note the info on load rating for two pitch offset links versus one pitch offset.


https://tsubaki.eu/support/general-info/introduction-tsubaki-roller-chain/

Title: Re: chain question
Post by: spooky on March 01, 2019, 05:09:50 PM

Thanks for the link, i ended up getting a new chain, made life a lot easier,

Title: Re: chain question
Post by: Propellor on March 01, 2019, 07:03:35 PM

👍

Title: Re: chain question
Post by: themoudie on March 01, 2019, 07:40:58 PM

That would have been my choice Rufus.  ;)  A chain anklet is not what you are looking for!  ???

My regards, Bill