Thumper Club Forum

Technical => Bike Problems/Questions => Topic started by: daveyboybikes on November 01, 2017, 03:13:38 PM

Title: dr125 sey shock
Post by: daveyboybikes on November 01, 2017, 03:13:38 PM
Hi All

I am in need of a mono shock my dr125 sey (2000) cant seem to find one on fleabay.

Are there any other models that will fit.

Thanks in advance

Dave
Title: Re: dr125 sey shock
Post by: themoudie on November 02, 2017, 09:13:31 PM
Aye Dave,

Welcome to the forum and thank you for the head scratcher!😉

Hen's teeth and rocking horse poo appear to come to mind and the prices may prove prohibitive, but here goes.

Manifold_motorcycle_parts (http://www.manifoldmotorcycleparts.co.uk)  This company is unknown to me, but appears to trade through eBay and has a large number of units/parts in stock for the DR125 models. I suggest a direct call first and see how it goes from there.

I have found Betor shocks to be of good quality and gòod value, so here is their website: Betor_shocks (https://betorspain.com)  Again contact direct for details as I am not sure if they cover the DR125 SEY model specifically. Price appears to be €200 + VAT + P&P

Finally, Hagon, like Betor list a unit for the DR125, but not specifically the SEY model. Their website is: Hagon_shocks (http://www.hagon-shocks.co.uk) Contact direct for details and be aware of £299 price!

Hope this helps. I have some other contacts, but cannot get them on this borrowed tablet I have whilst crocked, but will try to get vertical and sort something out.

My regards, Bill
Title: Re: dr125 sey shock
Post by: daveyboybikes on November 07, 2017, 08:46:27 AM
Thanks Bill I'll look into these.

It certainly a case of rocking horse poo!

Regards
Dave
Title: Re: dr125 sey shock
Post by: themoudie on November 08, 2017, 03:31:07 PM
Aye Dave,

Finally, a bit more vertical than horizontal and this is the website that I was trying to send to you for making enquiries to: Bike_Revival_M/C_shock_absorbers (http://www.bike-revival.co.uk/page1.html)

As you will see they supply Betor et al direct from UK, so no messing about with currency etc and they were very helpful when I contacted them directly by telephone.

I hope this helps. I will copy the basics of this to the 'Recommended Suppliers' forum, but I think I already may have posted the contact details there some time ago.

My regards, Bill