Thumper Club Forum
Technical => Bike Problems/Questions => Topic started by: Steve Lake on June 27, 2017, 08:53:16 PM
-
need to get a couple of SRX fuel tap repair/service kits ...
AND ..
A YDIS carb upgrade kit, seen them somewhere , can't remember where....
I bet Bill knows exactly where/how much/ and probably the name of the shop owners mother-in-law ... :D
-
Aye Steve,
Not sure if I know the Mother-in-Law, but below is the link that I think you are looking for:
Link: NRP-carbs (http://www.nrp-carbs.co.uk/)
My regards, Bill
-
A word of caution here. I've bought three BST33 float bowl rebuild kits from NRP over the last three or four years, the only useable parts of which have been the float bowl gaskets. The 'O' rings were poor quality and the seats and needles leaked worse than the ones I was trying to replace. YMMV of course...
-
Aye Steve,
Forgot to mention the DynoJet kits for the SRX600 standard carbs so here is a link:
pdq1_DynoJet_SRX600_carb_kit (http://www.pdq1.com/result.php?CatID=4430&MakeID=34&ModelID=940&Year=0)
Go to DynoJet for other suppliers, I have used the kit and it works well, but cannot tell you where it came from! :(
Suspect the problems that CrazyFrog has had with NRP are due to them including 'rubber' 'O'-rings, rather than Viton 'O'-rings.
Here is the link to DuPont, whom manufacture Viton: DuPont_Viton_O-rings_FAQ (http://www.viton-orings.co.uk/faq/viton_faqs/) Yet again, cutting corners and substituting cheap Chinese rubber 'O'-rings for Viton 'O'-rings is easy and makes a large difference to the suppliers "margin"! But it could be your neck! >:(
My regards, Bill
-
Bloody hell Bill!, you have excelled!! ...
you really should get out more ... 23 1/2 hours a day in front of your computer isn't good for you :D , even if it does help the rest of us ;)
ta very much
pip pip
-
I can only comment on petrol tap refurb kits I've had from NRP, and they all worked well ;)
-
Aye Steve,
No where near "Cyclops" for 3 days over the weekend and still rebuilding the fleet and gardening, along with long walks along beaches looking for agates! It's the 24 hour daylight up here! ;D ;D However, that ruddy low pressure you are sending us, with associated 'breeze' off the North Sea is not helping at present. Back to the workshop and maybe some genealogy after supper tonight. ::)
Toodle pip, Bill
-
no rest for the wicked Bill :D