Thumper Club Forum
Technical => Bike Problems/Questions => Topic started by: Moto63 on July 30, 2014, 10:15:38 AM
-
Morning all,
Am I correct in thinking that if I swap the cdi unit from the XBR to one from an xl600r that it will improve the performance of the XBR ? Thanks in advance Michael
-
I believe you need the CDI from an XL600R - it has more advance than the XBR unit and pepps it up quite a bit I'm told ( though I haven't tried it). I think it just plugs straight in - PM Joolz he knows.
-
Many thanks for the reply Steve , I,ll try pm,ing joolz see if he can shed some light on the subject. In the meantime if anyone else out there in thumper land knows the answer pls get in touch. Regards Michael
-
I run an XL600R cdi, plugs straight in and will give you a bit more advance. However I have been told that you cant use an electric start with it, I cant verify that as I dont have an electric starter fitted
-
Morning joolz,
Thanks for the post, the lack of lecci start would,nt be a problem as I also don,t run one. Think I,ll cost a unit up n give it a try. Regards Michael
-
I have recently been looking at the crank trigger, I have heard but cannot confirm that some models (I think the XR600) has a wider crank trigger that could give you more advance when fitted to the XBR. There is also a fully programmable cdi available for the XBR, Here is the link http://www.ignitech.cz/en/vyrobky
and here is a link on the XL cdi box http://www.scribd.com/doc/56944238/Cdi-Xl600-en
-
Hi joolz,
Thanks again for post and link, I,ll check it out. I,ve been onto David silver spares and the xl600r cdi unit no longer available as a new part, may have to give fleabay a go. Thanks again. Regards Michael