Thumper Club Forum

Technical => Bike Problems/Questions => Topic started by: guest668 on July 29, 2011, 09:38:18 AM

Title: clip ons on srx
Post by: guest668 on July 29, 2011, 09:38:18 AM

any one know if i could get a set of 35mm clip ons to fit the srx...just been offered some really cheap.

Title: Re: clip ons on srx
Post by: Steve H on July 29, 2011, 10:17:36 AM

Forks are 36mm on twinshock SRX and 38mm on the monoshock SRX

Title: Re: clip ons on srx
Post by: guest668 on July 29, 2011, 04:15:46 PM

so they wont fit then...

Title: Re: clip ons on srx
Post by: Ian on August 02, 2011, 07:23:19 PM

Quote from: beezer764 on July 29, 2011, 04:15:46 PM

so they wont fit then...

Perhaps I may be able to bore them out ?

Ian

Title: Re: clip ons on srx
Post by: guest1350 on August 02, 2011, 09:08:02 PM

The bars I have on my bike while they clip on to the forks above the top yoke they do clamp the forks.  What style do you have on there now? I would not mind doing a swap if it meant mine were a little higher.

Title: Re: clip ons on srx
Post by: Steve Lake on August 07, 2011, 09:01:50 PM

if you want to use your original clipons, but dropped between the top and bottom yokes, then you can grind off the locating lugs, and polish them up. they'll fit fine.... done it on several bikes

Title: Re: clip ons on srx
Post by: guest668 on August 10, 2011, 07:58:52 PM

thanks steve i have a spare pair of original clip ons so will give that a go...