Thumper Club Forum

Technical => Bike Problems/Questions => Topic started by: guest668 on July 29, 2010, 06:51:06 AM

Title: fornt sprocket
Post by: guest668 on July 29, 2010, 06:51:06 AM

hi another question which is the easiest way to remove the front sprocket on an engine...no chain fitted yet so old sprocket is free moving....may thanks

Title: Re: fornt sprocket
Post by: guest564 on July 29, 2010, 04:00:57 PM

Put it in gear, use a good quality socket and if it won't budge then try an impact driver.

Title: Re: fornt sprocket
Post by: guest40 on August 10, 2010, 09:18:37 AM

Don't forget to check if there is a tab washer locking the sprocket nut on.

Title: Re: fornt sprocket
Post by: guest668 on August 10, 2010, 09:51:00 AM

good point wasnt a locking tab on thesprocket should there be on an 85 srx600?

Title: Re: fornt sprocket
Post by: Ian on August 11, 2010, 10:22:00 PM

There should be a locking tab if you have a plain shaft or a splined lock washer if you have a splined shaft

Let me know which one you have and I will send you the part number

Ian :)