Thumper Club Forum

Technical => Bike Problems/Questions => Topic started by: Sprunghub on February 23, 2010, 03:27:34 PM

Title: XBR 500 Headlamp brackets / ears
Post by: Sprunghub on February 23, 2010, 03:27:34 PM
A couple of queries on XBR headlamp ear's, if any one has a set off & to hand.
Are they made of alloy & thus polish'able? (if not, what is the metal ?).... what is the diameter of the 'bore' for the fork tube ?... & do they have some sort of integral rubber seal's for gripping the fork tube ?

cheers

 
Title: Re: XBR 500 Headlamp brackets / ears
Post by: guest833 on February 23, 2010, 04:25:11 PM
Hi-

I have a set. They are made of alloy hence polishable. They are 42mm diameter bore to the inside of the alloy. With the rubber insert they are 35 mm (approx)

A couple on Evil bay at present-
http://cgi.ebay.co.uk/Honda-XBR-500-Headlamp-Brackets_W0QQitemZ110497122495QQcmdZViewItemQQptZUK_Motorcycle_Parts?hash=item19ba2448bf

http://cgi.ebay.co.uk/HONDA-XBR500-XBR-500-HEADLIGHT-FRONT-LIGHT-BRACKETS_W0QQitemZ200432307774QQcmdZViewItemQQptZUK_Motorcycle_Parts?hash=item2eaab24e3e

The ones I have and these on ebay are the earlier type- at around 1987 (E reg) on they have a hole in half way down the side of each to house the later shorter indicators- this was an amendment to house them on these headlamp brackets to stop the indicators flopping about like "a lazy lob on"

I can sell my set for £10 plus postage. Let me know and i'll get a pic on   

cheers

John
Title: Re: XBR 500 Headlamp brackets / ears
Post by: Sprunghub on February 23, 2010, 04:56:32 PM
Cheers John.....might be useful......
Title: Re: XBR 500 Headlamp brackets / ears
Post by: guest833 on February 23, 2010, 06:31:21 PM
There you go- i have also dug out the metal stays that go down to the said floppy indicators-
They have the rubber inserts also. As you can see they will polish up fine and have no scratches
cheers-

(http://i621.photobucket.com/albums/tt292/JohnSimpson/helment.jpg)[/img]