Thumper Club Forum

Technical => Bike Problems/Questions => Topic started by: andy0405 on November 28, 2007, 08:21:45 PM

Title: SRX400 indicators
Post by: andy0405 on November 28, 2007, 08:21:45 PM

The RH side indicators on my SRX400 having suddenly given up working, LH side is fine and the bulbs are good (tried them in LH indicators).

Is it likely to be the wiring (i've checked the connections) or the indicator relay ?

Any help appreciated.

Title: Re: SRX400 indicators
Post by: pigafetta on November 28, 2007, 08:48:15 PM

I'd check wiring before anything else. In my limited experience its usually mucky or oxidised connections. Could also be mucky contacts on the indicator switch.

Title: Re: SRX400 indicators
Post by: andy0405 on November 29, 2007, 03:17:26 PM

Just stripped and cleaned the switch, after a good dose of WD40 all is now working fine.