Thumper Club Forum

Technical => Bike Problems/Questions => Topic started by: guest288 on November 11, 2007, 10:24:54 PM

Title: XBR filters
Post by: guest288 on November 11, 2007, 10:24:54 PM

Hi Guys,

Can I get rid of the standard Airbox and replace the air filter with a pancake filter? If so, what/how do i sort out the crankcase breather? Can I replace that with a stand alone breather? If I replace the air filter, I'll probably need to change jet sizes- anyone done this and know what sizes i'll need???

Cheers Dave.

Title: Re: XBR filters
Post by: danny baker on November 14, 2007, 09:37:03 AM

I've got rid of mine. Breather pipe routed down below the frame. Ramair filter on the carb.
But you will have to change the main jet.

Title: Re: XBR filters
Post by: guest288 on November 14, 2007, 07:51:52 PM

Cheers Dan

Would re-routing the breather pipe to below the frame pose a risk to dropping oil on the ground just before the rear tyre? Would i be better off using a breather filter? Also, what type of ramair filter have you got on the carb?

Dave

Title: Re: XBR filters
Post by: danny baker on November 19, 2007, 08:34:40 PM

I think it's a 62mm made by Ramair