Thumper Club Forum

Technical => Bike Problems/Questions => Topic started by: guest288 on August 03, 2007, 09:20:47 PM

Title: Xbr clip-ons
Post by: guest288 on August 03, 2007, 09:20:47 PM

Hi all,
Does anyone know where I can get a set of clip-ons for my Xbr?
Thanks.

Title: Re: Xbr clip-ons
Post by: pigafetta on August 05, 2007, 01:43:42 PM

Hiya Dave.
Try this fella...

http://cgi.ebay.co.uk/Honda-XBR500-for-breaking-parts-available_W0QQitemZ120126596471QQihZ002QQcategoryZ10460QQrdZ1QQssPageNameZWD1VQQcmdZViewItem (http://cgi.ebay.co.uk/Honda-XBR500-for-breaking-parts-available_W0QQitemZ120126596471QQihZ002QQcategoryZ10460QQrdZ1QQssPageNameZWD1VQQcmdZViewItem)

Dave B

Title: Re: Xbr clip-ons
Post by: Ian on August 05, 2007, 07:58:43 PM

Hi Dave500,
I've got some spare , bolt clamp around a tube type ,well used.
Email me an offer if your interested ......... xbrmz(at)tiscali.co.uk  (at) = @

Title: Re: Xbr clip-ons
Post by: Dave on August 06, 2007, 06:30:09 PM

Thanks, are they the straight clip-ons or angled? (I already have the straight ones) I after the angled ones, like a more classic look...

Title: Re: Xbr clip-ons
Post by: Ian on August 06, 2007, 09:52:40 PM

Hi Dave,

Honda fitted 2 different types of clip-ons ,Both have similar angles ,but one has a bolt clamping the tube.

If you want the classic look turn them upside down and fit under the top yoke ,
I think you have to re-drill a couple of holes for the switchgear or turn the tubes 180 degrees.

Title: Re: Xbr clip-ons
Post by: guest7 on August 19, 2007, 10:59:10 PM

35mm is the same as one of the popular Imperial fork tube sizes so there are lots of clip-ons available from Brit bike parts suppliers.

GC