Thumper Club Forum

Technical => Bike Problems/Questions => Topic started by: Colin433 on July 07, 2007, 07:46:54 PM

Title: SRX 400 coil
Post by: Colin433 on July 07, 2007, 07:46:54 PM

Does anyone know where I can source a new coil for a 3vn srx400, and what sort of price do they go for? Please use small numbers as my bank manager is easily frightened.

Title: Re: SRX 400 coil
Post by: andy230 on July 10, 2007, 09:45:17 AM

Hello mate

You can have my complete 400 motor if you like.  Runs nice, its in glasgow.  £80, which is less than what I paid for it from another club member. 

I hope your bank manager is appreciating 20 year old japanese motorcycles!!

cheers

andy

ps.  lots of other srx stuff- dress it up with a nice metallic green matching tank and side panels?  Or red if you prefer, with a choice of matching red race seat?!  ;-)  Or a silver standard tail unit.... or... ok, ok I'll stop the hard sell!

Title: Re: SRX 400 coil
Post by: beeman on July 10, 2007, 02:44:20 PM

All 400 and 600 srx coils are the same

Title: Re: SRX 400 coil
Post by: Steve H on July 10, 2007, 03:18:43 PM

From memory the 3VN (mono) is diffrerent in that it has an earth and signal cable, but the twinshock has the single wire. (Could be wrong through)

Title: Re: SRX 400 coil
Post by: andy230 on July 10, 2007, 04:19:53 PM

Quote from: Colin433 on July 07, 2007, 07:46:54 PM

Does anyone know where I can source a new coil for a 3vn srx400

Sorry mate, mine is a twinshock motor.  Not much good!

andy

Title: Re: SRX 400 coil
Post by: Steve Lake on July 10, 2007, 09:36:26 PM

Of course the oracle (SteveH) is correct, but generally, you can say any single pole coil should work, if you are in doubt, buy my spare (which i can guarantee works ok on a twinshock srx6) for ~ £20 + carriage

or do you need a coil for a monshock SRX?, think i have one of those somewhere too


pip pip
SteveL