Thumper Club Forum
Technical => Bike Problems/Questions => Topic started by: Frog on May 12, 2007, 05:51:51 PM
-
Hi
My rear pads are nearly down to the metal.
Does any one know of a source and cost for these?
Cheers
Frog
-
i saw a very similar rear caliper on a little Sachs, i think it was called an XTC 125.
also looks like the same front caliper and even the headlight (mz sport).
www.sachsmotorcycles.co.uk (http://www.sachsmotorcycles.co.uk)
350bullet
-
Hi Frog,
Following link might be of use:
http://motorcycleproducts.co.uk/catalogue/mzmuz-rear-brake-pads-c-108_1004_1514_1526.html?osCsid=d55f8198857c9bcb3f3b65f0be978235
-
Hi, are the rears the same as the front???
-
Thanks everyone - now have some on order from Motorcycle Products
Cheers
Frog
-
if you need any more parts have a gander here: http://shop.wemoto.com/index.dyn?flag=17&make=MZ%20-%20MuZ
-
Dunno about the scorpion but my local bike shop was able to supply from the shelf for the Mastiff as it is mentioned in the model list in the parts book. Worth asking (and taking a note of the part number!)
-
Skorpion brake pads ,
EBC front FA95
EBC rear FA47
Or
BSA Company Ltd Phone , 023 8036 6404
Part No 90-21.035 £24.76 + VAT
Part No 90-21.055 £29.72 + VAT
Front cost more...
Better late than never !
-
I have a few sets of new (well, unused) Ferodo front pads bought in error, which fit the Scorp (& others)
£9 a set + P&P save a fortune? give me a call 0n 07930916509
(what I get for them goes into the race budget XBR getting ready for Pembrey!)