SRX600 34K v 1JK

[Mark]

To those that may know,

Will the 34K top end fit onto the 1JK bottom end?

Ta, Mark

[andy230]

Hi Mark,

34K is the XT600 tenere motor isn't it?

I used a mix and match of parts in on my race motor (660 cases, 3AJ barrel and 34K head I think)

There may be something about the stud pattern being different.  WIll have a look in my file and see what I have on it.

Cheers

a

[Mark]

34K is the XT600 tenere motor isn't it?

I used a mix and match of parts in on my race motor (660 cases, 3AJ barrel and 34K head I think)

There may be something about the stud pattern being different.  WIll have a look in my file and see what I have on it.

Cheers Andy, it is an XT600 top end. glad for any info.

Then just to see if I can get it.

Mark.

[andy230]

I will.... I promise!!  Soon!

    (sorry mate!)

a

[Mark]

I will.... I promise!!  Soon!

    (sorry mate!)

a

Ok mate in your own time. I have plenty to get on with.

[andy230]

Hi Mark,

I used a 3AJ barrel (XT600Z; 88-91), and a 2KF head (XT600; 87-89), on an XTZ (660 1VJ) crank case.

Sorry I cant be more help than to say the above will go together!

Cheers

a

[Mark]

Ok Andy, thanks for the info.

Not much help to me though.

Mark

[andy230]

Hi Mark

Your best bet is probably to give martin sweet a ring at slipstream tuning.

He will almost certainly know...

http://www.slipstreamtuning.co.uk/