Thumper Club Forum
Technical => Bike Problems/Questions => Topic started by: spooky on April 28, 2020, 11:11:50 AM
-
Has anyone used a tank sealer, was it any good and if it was, what brand ? ta
-
johnr is your man here and POR15 is the seal kit. Best results are obtained using the full, 3 stage kit, consisting of degreaser, metal prep etch and then sealer. If you look in the recommended services section, there's a thread on it, by SteveL. Best of luck.
-
Yes, it’s good gear indeedy Mr spooky, used it on the recommendation of this very forum. Best o luck 🤞🤞👍
-
johnr is your man here and POR15 is the seal kit. Best results are obtained using the full, 3 stage kit, consisting of degreaser, metal prep etch and then sealer. If you look in the recommended services section, there's a thread on it, by SteveL. Best of luck.
couldnt have put it better myself. ive used a few sealers and found por15 to be the best of the ones ive used. as has been said, get the full kit so you can clean and derust/degrease the tank prior to sealing it.